Miscellaneous Gas Utility Products

A variety of gas pipe welding tools available for butt fusion fittings at both low pressure and high pressure.

Utility Lockwing Gas Ball Valves

  • Tamper resistant lockwing cap
  • Full port design
  • 2 FKM o-rings
  • Pressure rating of 175 PSIG
  • Temperature range: -40°F to 300°F
  • CSA certified CSA 3.16-15 (125 g)
  • ANSI B16.33 (125 g)

Brass Ball Valve

  • Triple sealing stem with 2 FKM o-rings and 2nd generation PTFE seal
  • Blow-out proof stem
  • Leakproof stem – lifetime warranty
  • 25 in-hg vacuum rating

Gas Meter Change Out Tool

  • Primarily designed for meter change outs but can be used for other gas bypassing needs
  • Small and rugged design with standard aluminum bottle capacity of 40.1 cubic foot at 2216 PSI
  • Bottle weight at 14.4 lbs
  • Equipped with advanced pressure relief regulator for added safety
  • High strength steel construction for years of service
  • System designed to protect all gauges and other components from damage while remaining visible to operator

EZ T-Probe

  • Tough one-man probing tool that penetrates through dense soil
  • Mechanically enhanced probes are available in either a steel rod or fiberglass version with reinforced steel tip
  • 48″ tool length designed with an oversized tip to make retraction easier
  • Handle coated with PVC for up to 10,000 volt shock resistance

EZ Jack Plunger

  • Mechanically enhanced plungers in either a heavy duty or standard version
  • Plunger rods are made of steel or fiberglass and have a 52″ probe depth
  • Designed with an oversized tip to make retraction easier
  • Handle coated with PVC for up to 10,000 volt shock resistance

Gas Extractor – Gas Tornado

  • Using the Venturi Effect, this tool aggressively suctions gas from the ground
  • Designed to shorten the time it takes to pinpoint gas leaks and remove saturated residual gas from the ground
  • Generates 242″ of simultaneous pick-up power with no moving parts and can be used in less than 2″ diameter holes at any depth

Pipe Wrenches – Heavy Duty Straight

  • Workhorse pipe wrench model delivers on performance and durability
  • High-tensile ductile iron handle and hardened alloy steel parts are designed to withstand the heaviest demands
  • Hook jaw teeth on the 18″, 24″, and 36″ models allow for better grip for hard oil field pipe
  • Length – 8″ to 48″

EZ Aluminum Pipe Wrenches – Heavy Duty Straight

  • Light and strong pipe wrench design
  • Titanium-aluminum alloy handle of the aluminum pipe wrench is heat-treated for maximum strength
  • Available in variety of lengths from 10″ to 60″

Adjustable Wrenches

  • Triple-coated nickel-chrome exterior finish
  • Design angle allows for close quarter work on hex nuts
  • Precision-ground jaw slides make for the smoothest action

High Precision Digital Gauge

  • Highly accurate digital pressure gauge designed to be used for calibration and testing of pressure instruments in the field
  • Bluetooth function for datalogging including exporting function
  • Available ranges from very low pressure up to 15,000 psi (1,000 bar)
  • Temperature sensor included to record ambient temperature
  • 0.1% standard accuracy - optional ±0.05% and 0.2% accuracies available
  • Complete visual orientation with 330 degree dial roation
  • 5 year warranty

PEM Economy Pressure Gauges

  • Most economical all-purpose pressure gauge
  • 1.5" (40 mm) to 4" (100 mm) all sizes
  • Friction bezel rings
  • Black steel case
  • Brass or lead-free brass wetted parts
  • ASME B40.100 compliant (EN837-1 available)
  • ±3-2 3% accuracy
  • CRN registered
  • 5 year warranty