Miscellaneous Gas Utility Products
A variety of gas pipe welding tools available for butt fusion fittings at both low pressure and high pressure.
Utility Lockwing Gas Ball Valves
- Tamper resistant lockwing cap
- Full port design
- 2 FKM o-rings
- Pressure rating of 175 PSIG
- Temperature range: -40°F to 300°F
- CSA certified CSA 3.16-15 (125 g)
- ANSI B16.33 (125 g)

Brass Ball Valve
- Triple sealing stem with 2 FKM o-rings and 2nd generation PTFE seal
- Blow-out proof stem
- Leakproof stem – lifetime warranty
- 25 in-hg vacuum rating

Gas Meter Change Out Tool
- Primarily designed for meter change outs but can be used for other gas bypassing needs
- Small and rugged design with standard aluminum bottle capacity of 40.1 cubic foot at 2216 PSI
- Bottle weight at 14.4 lbs
- Equipped with advanced pressure relief regulator for added safety
- High strength steel construction for years of service
- System designed to protect all gauges and other components from damage while remaining visible to operator

EZ T-Probe
- Tough one-man probing tool that penetrates through dense soil
- Mechanically enhanced probes are available in either a steel rod or fiberglass version with reinforced steel tip
- 48″ tool length designed with an oversized tip to make retraction easier
- Handle coated with PVC for up to 10,000 volt shock resistance

EZ Jack Plunger
- Mechanically enhanced plungers in either a heavy duty or standard version
- Plunger rods are made of steel or fiberglass and have a 52″ probe depth
- Designed with an oversized tip to make retraction easier
- Handle coated with PVC for up to 10,000 volt shock resistance


Gas Extractor – Gas Tornado
- Using the Venturi Effect, this tool aggressively suctions gas from the ground
- Designed to shorten the time it takes to pinpoint gas leaks and remove saturated residual gas from the ground
- Generates 242″ of simultaneous pick-up power with no moving parts and can be used in less than 2″ diameter holes at any depth

Pipe Wrenches – Heavy Duty Straight
- Workhorse pipe wrench model delivers on performance and durability
- High-tensile ductile iron handle and hardened alloy steel parts are designed to withstand the heaviest demands
- Hook jaw teeth on the 18″, 24″, and 36″ models allow for better grip for hard oil field pipe
- Length – 8″ to 48″

EZ Aluminum Pipe Wrenches – Heavy Duty Straight
- Light and strong pipe wrench design
- Titanium-aluminum alloy handle of the aluminum pipe wrench is heat-treated for maximum strength
- Available in variety of lengths from 10″ to 60″

Adjustable Wrenches
- Triple-coated nickel-chrome exterior finish
- Design angle allows for close quarter work on hex nuts
- Precision-ground jaw slides make for the smoothest action
High Precision Digital Gauge
- Highly accurate digital pressure gauge designed to be used for calibration and testing of pressure instruments in the field
- Bluetooth function for datalogging including exporting function
- Available ranges from very low pressure up to 15,000 psi (1,000 bar)
- Temperature sensor included to record ambient temperature
- 0.1% standard accuracy - optional ±0.05% and 0.2% accuracies available
- Complete visual orientation with 330 degree dial roation
- 5 year warranty

PEM Economy Pressure Gauges
- Most economical all-purpose pressure gauge
- 1.5" (40 mm) to 4" (100 mm) all sizes
- Friction bezel rings
- Black steel case
- Brass or lead-free brass wetted parts
- ASME B40.100 compliant (EN837-1 available)
- ±3-2 3% accuracy
- CRN registered
- 5 year warranty





